Growing Knowledge

Read the latest insights from our experts as they cover agronomy issues that matter most to you and your operation.

High Management Is a Winner for Wheat

Tiffany Braasch
Master Agronomy Advisor
Kent Pfaff of Washburn, North Dakota, took first place this past December in the National Wheat Yield Contest in the Spring Wheat—Dryland category, harvesting 104.29 bushels per acre with CROPLAN® 3530. To me, more important than achieving this yield is that it also optimized his profit. As Kent’s local agronomist, I wanted to share some of the secrets to his success, which include timely input applications, in-season imagery and tissue sampling data.
 
Fertility crucial from preplant to in-season
Kent starts the season with a soil test to gauge fertility. At planting he applies a micronutrient package that contains zinc with his starter fertilizer. Plant roots, whether they are corn or wheat require zinc in higher amounts in early plant growth. He also treats his seed with Warden® Cereals WR, a product that contains both fungicide and insecticide that protects seedlings from disease and insects early in the growing season. In addition to Warden® Cereals WR, he also uses Ascend® plant growth regulator to help enhance the growth and development of wheat early in the season.
 
Kent customizes a variable-rate nitrogen prescription for each field. This helps him hit his high-end yield goals on the highest-fertility part of his field while backing off on his tougher or less productive areas. He starts with the response to nitrogen (RTN) recommendations for his variety when planning the prescription. Kent variable-rate applies his nitrogen in the form of anhydrous ammonia and applies it side dressed at the same time as seed and starter fertilizer. Like many farmers in our area who use no-till or minimum-till systems, Kent uses this “one-pass” system for his small-grain crops.
 
Follow recommended populations 
Kent followed the CROPLAN® response to population (RTP) scores in determining planting rate, in this case 1.5 million seeds per acre. With other wheat varieties, he may have gone up to 1.8 million seeds per acre; but with CROPLAN® 3530, he optimized yield at a lower planting rate. Managing each variety according to Answer Plot® Program recommendations is key.
 
Maximize acre-by-acre management
In addition to using the R7® Tool to variable-rate apply his nitrogen, Kent is using the R7® Field Monitoring Tool and in-season imagery to track day-to-day performance on all fields in his operation. Early season between third and fifth leaf, he applies herbicides for weed control. At the same time, the use of an insecticide and fungicide helps control disease and insects on the wheat. Another application of fungicide at heading helps control late season disease such as scab. He felt there was yield left on the table by not investing in a flag leaf application. CROPLAN® 3530 has a high response to fungicide (RTF) scores, and we will evaluate this season to determine if another application at flag leaf might optimize his return. Kent says that to him, as a farmer the bottom line is that we achieved a high yield but, more important, improved profitability.
  
Winning with Wheat
Kent and the other National Wheat Yield Contest winners will be honored at the Commodity Classic farm trade show, to be held in San Antonio, Texas, in early March. Congratulations to Kent on this exciting and well-deserved honor. If you want to find out more about the National Wheat Yield Contest, click here. To find out more about how you can increase the yield potential of your spring wheat crop, talk with your local agronomist.

Tech Tasks After Harvest: Part 1

Joel and Kyle
Hosts, WinField
On this week’s episode of The Deal With Yield®, host Joel Wipperfurth welcomes Drew Garretson, regional technology manager for WinField® United, to discuss the best ways to use ag technology after harvest. Now is a perfect time to evaluate which management practices were successful this past growing season based on in-season imagery and yield data, and how to improve next year. Also hear about the updated R7® Tool and how it has been re-engineered to be faster, more user-friendly and customizable. 
 
For more information about the R7® Tool updates, visit answertech.com
Season 7: Episode 4 – Tech Tasks After Harvest: Part 1

The Deal With Yield is a podcast series covering the issues that matter most in crop production. 

Manage Fall Nitrogen Responsibly

Jonathan Zuk
Regional Agronomist
Fall nutrient applications, particularly nitrogen, can help crops get off to the right start the following year. At the same time, targeted nutrient management is a goal shared across our industry, especially with nitrogen issues at the forefront of many conversations. It’s important to check field conditions and use technology to determine effective and responsible nitrogen management practices.
 
Stabilize nitrogen for sustainable, effective use
It is important to stabilize nitrogen in the fall to slow down its conversion into the mobile nitrate form. Un-stabilized nitrogen applications will expose the field to more risk, leaving winter precipitation and wet spring conditions to carry the nitrate nitrogen off target. Stabilizing nitrogen protects your investment as well as water quality.
 
The majority of nitrogen loss (around 70%) can occur below ground so adding protection to reduce leaching and loss from denitrification is important. Using N-Serve® nitrogen stabilizer with fall-applied anhydrous ammonia will make that nitrogen less susceptible to loss by keeping more of it available in the root zone during key corn growth stages.
 
Check field conditions for best nitrogen application timing 
There are several things you can easily evaluate to determine if fall nitrogen applications are appropriate for your acres.
  • Soil temperatures should cool to (and stay below) 50 degrees Fahrenheit as this is when soil bacteria activity is reduced.
  • Soil textures should be medium to loamy for optimal fall nitrogen applications. Sandy soils and coarse to medium topsoil with fractured limestone may allow fall-applied nitrogen to leach into water supplies, threatening groundwater quality.
  • Soil moisture that is moderate works best for ammonia application, but dry soils with medium or heavy texture that are in good physical condition can also work. Wet soils must be avoided due to poor sealing ability and potential of clodding.
 
Use tech to manage nitrogen responsibly
Using ag technology to optimize nitrogen applications can significantly increase potential return on investment and minimize the overall impact to the environment.
  • In-season imagery can help ensure you pinpoint the exact locations within a field where high yield environments exist. These images can be used to design a base layer fall nitrogen recommendation which can be followed by a precise in-season application to optimize high yield zones.
  • Models can aid you in monitoring in-season variables and making decisions on optimal rates. For example, you can see unfavorable weather in the forecast or look at response to nitrogen (RTN) scores on your hybrids and realize your hybrid might be hungry for nitrogen to drive an increase in bushels.
  • Tissue and soil samples can be paired with models and imagery to provide more insight into what the plant is enduring. Sampling can also be used to calibrate the model back to fit your farm and hybrid.
  • Variable rate technology can be used to apply nitrogen exactly where it needs to go. This can be beneficial for minimizing nitrogen waste and managing cost per bushel.
 
Contact your local WinField United retailer to determine the best nitrogen management options for your operation.

Manage Fall Nitrogen Precisely

Jonathan Zuk
Regional Agronomist
Fall nutrient applications, particularly nitrogen, can help crops get off to the right start the following year. At the same time, targeted nutrient management is a goal shared across our industry, especially with nitrogen issues at the forefront of many conversations. It’s important to check field conditions and use technology to determine effective and responsible nitrogen management practices.
 
Check field conditions for best nitrogen application timing  
There are several things you can easily evaluate to determine if fall nitrogen applications are appropriate for your acres.
  • Soil temperatures should cool to (and stay below) 50 degrees Fahrenheit as this is when soil bacteria will go dormant.
  • Soil textures should be medium to loamy for optimal fall nitrogen applications. Sandy soils and coarse to medium topsoil with fractured limestone may allow fall-applied nitrogen to leach into water supplies, threatening groundwater quality.
  • Soil moisture that is moderate works best for ammonia application, but dry soils with medium or heavy texture that are in good physical condition can also work. Wet soils must be avoided due to poor sealing ability and potential of clodding.
Stabilize nitrogen for effective use
It is important to stabilize nitrogen in the fall so that it does not convert into the mobile nitrate form. Un-stabilized nitrogen applications will expose the field to more risk, leaving late season fall rains or wet spring conditions to carry the nitrate nitrogen off target. Stabilizing nitrogen protects your investment as well as land and water quality.
 
Use tech to manage nitrogen responsibly
Using ag technology to optimize nitrogen applications can significantly increase potential return on investment and minimize the overall impact to the environment.
  • In-season imagery can help ensure you pinpoint the exact locations within a field where high yield environments exist. These images can be used to design a base layer fall nitrogen recommendation which can be followed by a precise in-season application to optimize high yield zones.
  • Models can aid you in monitoring in-season variables and making decisions on optimal rates. For example, you can see unfavorable weather in the forecast or look at response to nitrogen (RTN) scores on your hybrids and realize your hybrid might be hungry for nitrogen to drive an increase in bushels.
  • Tissue and soil samples can be paired with models and imagery to provide more insight into what the plant is enduring. Sampling can also be used to calibrate the model back to fit your farm and hybrid.
  • Variable rate technology can be used to apply nitrogen exactly where it needs to go. This can be beneficial for minimizing nitrogen waste and managing cost per bushel.
Contact your local WinField United retailer to determine the best nitrogen management options for your operation. 

Subscribe to the Advisor Newsletter

Sign up for monthly agronomic insights and product information.